The table column style rule added since 0.35.0 is disabled, since the docs pad tables loosely rather than aligning every pipe, and the docs are updated for the other rules it now enforces.
A deploy that exited before releasing its lock, such as after a failed build, left `.deploy.lock` behind, so `apps:locked` reported a lock nothing held and the build record stayed running. The lock is now released and the record finalized whenever the deploy exits. `apps:lock` never actually blocked deploys, as it only created the file deploys lock. It now creates its own lock that git pushes, `ps:rebuild`, `git:sync`, and the `git:from-*` commands refuse to deploy past, and `apps:locked` only reports a lock when the app was locked via `apps:lock` or a deploy is in progress. Locks created by `apps:lock` in older versions are migrated on install.
The source-image property was written before the deploy lock was taken
and was not restored when a deploy failed, so after a rejected
git:from-image or git:load-image it named an image that was not
deployed, and later builds extracted app.json, Procfile, and CHECKS
from it. Deploys from other sources also built while the old image was
still set.
Entry points now pass the desired value via DOKKU_GIT_SOURCE_IMAGE and
git_receive_app applies it while holding the deploy lock, restoring the
previous value on failure. git:sync clears the property under the lock
when it fetches new code.
Closes#9117
The `git:auth-status` command returned `1` both when a host had no `netrc` entry and when it had one that differed, so tooling wanting to tell a credential that would be created apart from one that would be replaced had to issue a second call with no username purely to find out which of the two it was. A host with no entry now exits `1`, a host whose entry differs from what was passed exits `2`, and invalid arguments exit `3`, leaving `0` to mean the stored state already matches. Called without a username the requested state is that no entry exists, so an existing entry is reported as `2` and `1` is never returned. Callers that only test zero versus non-zero are unaffected.
Renames the existing `## Internal properties` umbrella section to `## Properties` across all plugin docs and adds a new `### Settable properties` subsection enumerating every property accepted by each plugin's `:set` command. Each row lists scope, default, the actual `:report` flag shapes that surface the value, and a one-line description. The buildpacks plugin is included even though it uses `:set-property`, with a note in the subsection clarifying the legacy command name. Property lists, scopes, and report flags were verified against plugin source and the live dokku binary.
The bats coverage for plugin :report keys has been uneven since the raw/global/computed split landed in PR #8640. This commit adds a single combined triplet test per settable property across app-json, builder, builder-dockerfile, builder-herokuish, builder-lambda, builder-nixpacks, builder-pack, builder-railpack, buildpacks, cron (maintenance), git (keep-git-dir, rev-env-var, source-image), logs (vector-sink, vector-global-image, vector-global-networks), network (attach-post-create, attach-post-deploy, initial-network), proxy (per-app type), ps (stop-timeout-seconds), registry (image-repo, push-on-release, push-extra-tags), storage (build/deploy/run mounts), and adds a new tests/unit/scheduler.bats and tests/unit/nginx-vhosts_properties.bats. Brings ps `procfile-path` and `stop-timeout-seconds` global getters in line with the #8640 convention (raw global, default resolved in computed). Documents the read-only and internal properties that surface in `:report` (or are written by Dokku) but cannot be managed by `:set` in a new `## Internal properties` section appended to each affected plugin's docs page.
The `<plugin>-global-<property>` keys in `:report` output returned the resolved value with the built-in default substituted in, so external tooling could not distinguish a property that had been set globally to the default from one that had never been set. The bare keys for caddy, haproxy, and traefik global-only properties had the same shape. The `global-<property>` keys now hold the raw stored value and are empty when nothing has been set, and a new `computed-<property>` key holds the effective value used at runtime, falling back through the per-app value (where one exists), the global value, and the built-in default. The bare global-only keys for the three proxy plugins are removed in favor of the raw/computed pair. Closes#8631.
The bare `deploy-branch` and `keep-git-dir` keys in `git:report` returned the computed (effective) value rather than the raw per-app value, with no separate `computed-*` key to distinguish "set per-app" from "falling back to global or default". This left external tooling unable to detect a per-app unset without out-of-band state. The bare keys now hold the raw per-app value (empty when unset) and new `computed-deploy-branch` and `computed-keep-git-dir` keys hold the effective value, matching the convention used by `nginx-vhosts`, `network`, and `builder`. Closes#8610.
Mirrors the JSON output convention already used by scheduler:report, builder:report, network:report, and traefik:report. Both plugins now accept `--format json` to emit a single-line JSON object whose keys are the property names with the plugin prefix stripped. Combining `--format` with an info flag is rejected with an error message that matches the Go-based report helper.
Closes#8499
Adds `git:auth-status HOST [USERNAME] [PASSWORD]` which exits 0 when the
configured `.netrc` entry matches the requested state and 1 otherwise,
allowing external tooling to detect whether `git:auth` would change
anything without reading `$DOKKU_ROOT/.netrc` directly. Both `git:auth`
and `git:auth-status` now also accept the password via `STDIN`.
While this might not seem super intuitive, the key is mostly related to git management, not the ssh-keys we currently use to add/remove access to push to dokku.
This ensures users don't have issues with cached state in regards to files pulled from the repo/image.
Also add missing docs for deploy-source-set trigger.
Closes#5963
The command for using an image doesn't include a colon before the `@sha`. Just wanted to help out others because this was tripping me up for like an hour!
The previous tar support lacked the ability to track changes between tarball deploys. Critically, it also failed to be handled correctly when there was _also_ a git deployment done on the app, resulting in odd deployment states depending on the angles of the moon and the sun in the sky.
Rather than try to "fix" this through some hokey mechanism, importing the tar file contents into the git repository is preferred, as then the user can refer to the repository for commit history.
Additionally, we add support for non-tar files (tar.gz and zip), enabling deployments from systems that do not create tar files, such as Github (their tarball url is a tar.gz file).
Finally, this deprecates the tar plugin, and sets it to be removed in the next minor release (in addition to the tags plugin).
Closes#3458Closes#4207
The new command superscedes the previous tags plugin, and integrates docker image deployment with the general build process.
While `docker image load` is not supported, this otherwise completely handles all previous workflows supported by the `tags:deploy` command, while doing so in a much easier to use interface.
Closes#4296
Git worktrees do not include the full .git directory - only a pointer to the actual directory - when keep-git-dir is set to true, which is incorrect for built containers. This change special-cases that combination, allowing folks on newer git installs to actually keep the .git directory during the build process.
Closes#4415
This change adds a new builder - builder-cnb - via the 'DOKKU_CNB_EXPERIMENTAL' environment variable. While support for customizing pack builds is not currently implemented and there may be other missing functionality, this initial implementation allows folks to start playing with CNB.
Future releases of Dokku will provide tighter CNB integration and eventually switch to CNB for default building, as well as allow users to better select builders needed for their applications.
All new code for CNB support should be considered experimental and subject to change as the support evolves over time.