`storage:mount --replace` writes one process type's whole attachment set in a single call, but only part of an attachment could vary between the mounts in that call: each mount carried its own `ro` and Docker mount options while `--phase`, `--volume-subpath` and `--volume-chown` were fixed for the whole call, so an app whose mounts differ only in subpath still needed one call per mount, which is the non-atomic convergence `--replace` exists to remove. Each mount's option list now also carries `phase=`, `volume-subpath=` and `volume-chown=` tokens alongside `ro`, its new opposite `rw` and the Docker options it already passed through, and so that each attribute has exactly one spelling the five matching flags are now rejected with `--replace` - one of which, `--volume-options`, was previously accepted and silently dropped. `--process-type` still scopes the whole call, since it selects which mounts the call is authoritative over rather than describing any one of them. Every mount is parsed and validated before anything is written, so a rejected token leaves the stored mounts untouched. The documentation added for `--replace` was also marked as new in 0.38.28 in four places, but it shipped in 0.38.29.
An attachment's process type was recorded, reported and used to scope `storage:mount --replace` and `storage:unmount --all`, but nothing read it when the volume was actually mounted, so `storage:mount <app> <entry> --container-dir <path> --process-type web` bound the volume into every process rather than only `web`. Both schedulers now scope a mount to the process type it was declared for, and containers that belong to no process type - a `dokku run` one-off, an `app.json` deploy task, a k3s cron job - receive default-scoped mounts only. A container path can now be claimed by a single mount per process type, and `storage:migrate` drains process-scoped `-v` lines out of `docker-options` rather than only the default-scoped ones.
The `storage` plugin mounted and unmounted one attachment at a time, so matching an app's mounts to a declared set meant reading `storage:list`, computing the difference in both directions and issuing one `storage:mount` or `storage:unmount` per addition and removal, with a failure partway through leaving the app holding a mixture of the two sets.
A `--replace` flag on `storage:mount` now writes the declared set in a single call, taking `name:container-dir` pairs whose optional third field carries the same mount options the legacy colon form accepts. Every pair is parsed and validated before anything is written, so a rejected pair leaves the stored mounts untouched. The remaining mount-time flags scope the whole call the way `--process-type` already scoped a single mount, which means an omitted `--process-type` replaces the `_default_` scope and leaves mounts scoped to a named process type in place.
An empty pair list is rejected rather than treated as a request to unmount everything, so a generated list that expands to nothing cannot silently drop an app's storage. `storage:unmount --all` handles that case instead, taking an optional `--process-type` filter and treating a scope that matches nothing as a no-op so it stays idempotent.
`storage:unmount` also accepts more than one mount at a time, naming each by entry name or by the colon form, and resolves every argument against the app's attachments before removing any of them.
The help listing now carries one entry per subcommand with its flags inline rather than a row per variant, and the command listing at the top of the storage documentation matches it line for line. Folding those rows together also surfaced `--global` on `storage:report` and `storage:migrate`, neither of which both listings had mentioned.
Finally, `--volume-chown` is now validated on mount, where a typo previously exited zero and wrote a value that only the report ever read.
`storage:set` now takes `<name> <property> [<value>]` like every other `:set` command, where omitting the value unsets the property. Previously it took flags and could not distinguish an empty value from an omitted one, so nothing it set could ever be cleared. The flag form keeps working and emits a deprecation warning.
Annotations and labels move to `storage:annotations:set`, `storage:annotations:report`, `storage:labels:set`, and `storage:labels:report`, matching the `scheduler-k3s` equivalents. These operate on a single key, so clearing one leaves the rest in place rather than replacing the whole map as the `--annotation` and `--label` flags do.
`storage:create` and `storage:set` accept a `--mode` flag that sets the octal permissions of a docker-local host directory, and `storage:destroy` accepts a `--destroy-host-dir` flag that removes the directory along with its contents. A docker-local entry also honors `--reclaim-policy Delete` at destroy time now, matching how that policy governs a k3s PersistentVolume. Both are limited to the default `/var/lib/dokku/data/storage/<name>` location, the same restriction `--chown` already carries. `storage:set` applies `--chown` and `--mode` to the directory rather than only recording them.
The named-entry form of `storage:mount` had no way to set the attachment's `volume_options`, even though the legacy `host:container:opts` colon form parses options into the same field and every downstream consumer (the docker-args trigger and the storage:list/storage:report display path) already renders them. Tooling that declaratively re-applies attachments silently dropped options on every re-apply.
`storage:destroy` now prompts for confirmation before removing a named storage entry, matching the behavior of other destructive commands such as `apps:destroy` and `network:destroy`. The prompt can be skipped with the `--force` flag or the global `dokku --force` flag for non-interactive callers.
Adds an app-aware `fn-verify-app-image` helper that pulls the deployed image
from the configured registry when it is missing locally, gated on
push-on-release being enabled, honoring per-app `registry:login` credentials.
Every in-tree `verify_image` caller migrates to the wrapper and the bare
helper is marked deprecated. `config:set` now forwards the deployed image tag
to `release-and-deploy` so the release path no longer pins recovery on the
unrecoverable `:latest` tag.
Adds plugins/storage/migrate_test.go exercising migrateApp and MigrateLegacyMounts: single deploy phase, cross-phase grouping into one attachment, :ro and free-form volume options preserved on the attachment, idempotency on a second pass, the per-app flag-file fast path that skips already-migrated apps, and the name-collision refusal that aborts before draining. tests/unit/storage.bats gains an end-to-end case that stages a -v line via docker-options:add, runs storage:migrate, and asserts the synthesized colon form shows up in storage:list, the legacy-<hash> entry shows up in storage:list-entries, and the original -v line is gone from docker-options:report on both phases. To make that test (and operators with restored backups) practical, storage gains a storage:migrate <app>|--all subcommand backed by a new MigrateApp helper that skips the per-app flag file so a re-run actually re-scans.
Moves the actual exec out of the storage plugin and into a new scheduler-storage-exec plugn trigger. scheduler-docker-local does docker run with TTY-aware -it/-i selection and --user derived from entry.Chown; scheduler-k3s creates a throwaway Pod via the kubernetes API, waits for it to reach Running with structured error reporting (ImagePullBackOff and friends are surfaced from the container status verbatim, no kubectl involvement), execs the user command via the existing SPDY plumbing in k8s.go, and deletes the Pod on the way out. (Entry).Validate now accepts either an absolute path or a docker named-volume token for docker-local entries so the migration synthesizer's named-volume legacy entries work cleanly. storage:exec gains --as-user for one-off uid overrides, propagates the underlying tool's exit code via os.Exit, and detects TTY/interactive mode from os.Stdin so non-interactive scripted use no longer trips over docker's input-device-is-not-a-tty error.
storage:set is the in-place editor for an existing entry; size grows are passed through to a helm upgrade and Kubernetes-incompatible swaps (access-mode, storage-class) are rejected up front. storage:exec spawns a throwaway container that mounts the entry: docker run on docker-local entries, kubectl run with a Pod-spec override on k3s, falling back to bash then sh when no command is supplied. storage:wait blocks until a k3s entry's PVC reports Bound via the storage-status trigger, with a docker-local fast path that just checks the host directory. storage:report --global enumerates every registered entry and the apps that mount it, in text or JSON form.
storage:mount and storage:unmount now accept the named-entry form (--container-dir, --phase, --process-type, --volume-subpath, --volume-readonly, --volume-chown), persisting attachments via the property list. The legacy host:container colon form is preserved for back-compat. Storage now emits its own docker-args-deploy and docker-args-run triggers so docker-local apps continue to receive bind mounts even after their data moves out of docker-options. The install trigger walks every app once per upgrade and converts legacy -v lines into legacy-<hash> entries plus attachments, draining the originals from docker-options last so a partial run leaves the old behavior intact. Lifecycle triggers post-delete, post-app-clone-setup, and post-app-rename-setup keep the attachment store in sync with app state.
Wires the new entry-management commands on top of the Entry type. storage:create accepts both docker-local entries (with idempotent host-directory creation) and k3s entries (which delegate PVC provisioning to a forthcoming scheduler-side storage-create trigger). storage:destroy refuses to remove an entry that any app still mounts. storage:ensure-directory now emits a deprecation warning. storage:mount and storage:unmount keep the existing colon-form behavior so this commit is non-breaking; the named-entry mount form follows in a later commit.
Every `:report` subcommand now recognizes `--global` as a scope selector that limits the report to globally-configured properties, including in JSON form via `--global --format json`. Previously this combination was rejected because `--global` was treated as an info flag, conflicting with `--format`. The shared `common.ParseReportArgs` helper now returns a `ReportArgs` struct exposing the parsed scope; each Go and bash report selects a global-only flag map when scope is global, and skips per-app verification.